NCV-40H - Binary / Gray Output Converter - NSD Việt Nam

STC TRADING SERVICE CO., LTD 

                110 Hoa Cuc Street, Ward 7, Phu Nhuan District, HCMC

Mr.Hòa
[Senior Sales Eng. ]

[Cellphone]: 0973.940.975

                01273.991.62201273.991.622 

[Email]: hoa@songthanhcong.com

[Yahoo]: Sagittarius_1610

[Skype]: hoadinh_stc

THƯ NGỎ - STC VIỆT NAM

Công ty  TNHH TM DV Song Thành Công (STC) chúng tôi luôn tự hào là một trong những nhà cung cấp vật tư và thiết bị hàng đầu chuyên dùng cho ngành công nghiệp trong các dây chuyền sản xuất và trong các hệ thống điều khiển toàn bộ hệ thống hoạt động của nhà máy, xí nghiệp hay các sản phẩm của công nghệ cao và chất lượng.

Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Cảm biến, Encoder, Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…

 

 

General purpose of digital binary or gray code output converter

Model coding

NCV-40H[1][2][3]

[1]Output code

Code	Output code
B	Binary
G	Gray

[2]Output system

Code	Output system
N	Sink type
P	Source type

Please contact your NSD representatives for further details of source type specifications.

[3]Applicable sensor

Code	Applicable sensor
M3	MRE-32S16TS062FAB
M5	MRE-1024S16TS062FAB

ABSOCODER Basic Configuration

Specification

General specification

Item	Specification
Power supply voltage	24VDCV±10% (including ripple)
Power consumption	10W or less
Insulation resistance	20MΩ or more between external DC power terminals and ground (by 500 VDC insulation resistance tester)
Withstand voltage	500 VAC, 60Hz for 1 minute between external DC power terminal and ground
Vibration resistance	20m/s2 10 ～ 500Hz, 10cycles of 5 minutes in 3 directions, conforms to JIS C 0040 standard
Ambient operating temperature	0 ～ +55℃ (No freezing) (Surrounding air temperature rating of 55℃ maximum)
Ambient operating humidity	20 ～ 90 %RH (No condensation)
Ambient operating environment	Free from corrosive gases and excessive dust
Ambient storage temperature	-10 ～ +70℃
Grounding	Must be securely grounded (ground resistance of 100 ohm or less)
Construction	Book-shelf type within enclosure, DIN rail mountable
Outside dimension (mm)	39(W)×155(H)×93(D) Refer to dimensions for details.
Mass	Approx. 0.4kg

Performance Specification

Item	Specification
Converter model	NCV-40HBNM3 NCV-40HGNM3			NCV-40HBNM5 NCV-40HGNM5
Number of detection axes	1
Position data sampling time	0.1ms
Status output signal	Latch pulse (Position data reading timing): 1 point System ready: 1 point Error : 1 point
Input signals	Position data hold signal: 1 point Zero point setting signal: 1 point Error clear signal: 1 point
Control panel function	Zero point setting, error clear
Switch (on rear face of product)	Position data increase/decrease direction setting (CW / CCW) :1point
	Position data update cycle	Edge timing		0.1ms
				0.2ms
				0.4ms
				0.8ms
		Level timing 1		0.8ms
				1.6ms
				3.2ms
				6.4ms
		Level timing 2		3.2ms
				6.4ms
				12.8ms
				25.6ms
				51.2ms
	HOLD signal format	Transparent format
		PC synchro format
	LP signal logic (Non-inverted/Inverted): 1 point
	Zero point setting function selection (Enabled/Disabled): 1 point
	Clearing method setting of the sensor disconnected error (auto clearing / manual clearing): 1 point
Monitor LED	Output state monitor	Position data output, latch pulse output
	Input state monitor	HOLD input, zero point setting input, error clear input
	Error state monitor	Sensor disconnected error, memory error,Low power error Sensor power supply error, Switch setting error

Number of divisions, resolution, and sensor cable length of the ABSOCODER sensor

Multi-turn and high resolution type MRE

Item	Specification
Converter model	NCV-40HBNM3	NCV-40HGNM3	NCV-40HBNM5	NCV-40HGNM5
Output code	Binary	Gray	Binary	Gray
Applicable sensor	MRE-32S16TS062FAB		MRE-1024S16TS062FAB
Total number of turns	32		1024
Divisions/Turn	65536 (216)
Total number of divisions	32 turn×65536 (221)		1024 turn×65536 (226)
Max. sensor cable length	100m

I/O spcification

Item		Specification
Input	Input signals	HD (Position data HOLD) : 1 point ZPS (Zero point setting signal): 1 point CLR (Error clear signal): 1 point
	Input circuit	DC input, photo-coupler isolation
	Input logic	Negative logic
	Rated input voltage	12 ～ 24VDC(10 ～ 27VDC)
	Rated input current	10mA(24VDC)
	ON voltage	10VDC or more
	OFF voltage	2VDC or less
Output	Output signals	D0 ～ D25(Position data) : 26 points NOR(System Ready) : 1 point LP(Latch pulse: position data reading timing): 1 point Error: 1point
	Output circuit	Isolation, photo-coupler open collector output
	Output logic	Negative logic
	Rated load voltage	12 ～ 24VDC (30VDC max.)
	Max. load current	50mA/point
	Max. voltage drop when ON	0.8 V or less