VS-5FXG - NSD Việt Nam

STC TRADING SERVICE CO., LTD 

                110 Hoa Cuc Street, Ward 7, Phu Nhuan District, HCMC

Mr.Hòa
[Senior Sales Eng. ]

[Cellphone]: 0973.940.975

                01273.991.62201273.991.622 

[Email]: hoa@songthanhcong.com

[Yahoo]: Sagittarius_1610

[Skype]: hoadinh_stc

THƯ NGỎ - STC VIỆT NAM

Công ty  TNHH TM DV Song Thành Công (STC) chúng tôi luôn tự hào là một trong những nhà cung cấp vật tư và thiết bị hàng đầu chuyên dùng cho ngành công nghiệp trong các dây chuyền sản xuất và trong các hệ thống điều khiển toàn bộ hệ thống hoạt động của nhà máy, xí nghiệp hay các sản phẩm của công nghệ cao và chất lượng.

Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Cảm biến, Encoder, Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…

 

 

General purpose analog position voltage output converter

VS-5FXG-1

Additional function for Advance angle and top dead center.

Advance angle function in automatic synchronize with mechanical side can adjust the right signal control according to the cam press and other mechanical timing change.

Signal output faster or slower when the timing is faster or slower than usual automatically. High speed cam press and fast move conveyor system is required to adjust the timing control.

ADVANTAGE

• Max.40 points of cam switch signal output
• Max.900r/min for advance angle and top dead center function
• Max.0.176ms of signal updating cycle

• Model coding
• ABSOCODER Basic Configuration
• Specification
• Dimensions

Model coding

VS-5FXG[1]-1

[1]Output system

Code	Output system
Blank	Sink type
T	Source type*1

Contact us about source type specification details. The source type can only be used with 24VDC power voltage.

ABSOCODER Basic Configuration

Specification

General specification

Item	Specification
Power supply voltage	24VDC
Permissible power voltage range	21.6 ～ 30VDC
Power consumption	10W or less
Insulation resistance	20MΩ or more between external AC power terminals and ground (by 500 VDC insulation resistance tester)
Withstand voltage	500 VAC, 60Hz for 1 minute between external DC power terminals and ground
Vibration resistance	20m/s2 10 ～ 500Hz, 10cycles of 5 minutes in 3 directions, conforms to JIS C 0040 standard
Ambient operating humidity	20 ～ 90 %RH (No condensation)
Ambient operating environment	Free from corrosive gases and excessive dust
Ambient storage temperature	-10 ～ +70℃
Grounding	Must be securely grounded (ground resistance of 100 ohm or less)
Construction	Inside control panel
Mounting	Select from two-screw mounting/DIN rail installation/ on-panel mounting using panel mounting fixture VS-K-F.
Outside dimension (mm)	130(W)×81(H)×99(D)
Mass	Approx. 0.7kg

Performance Specification

Item		Specification
Converter model		VS-5FXG-1
Applicable sensor		VRE-P028, VRE-P062
Min. setting units		0.5°
Number of programs (Panel display)		16
Number of switch outputs		40
Number of multi-dogs		10 times for each switch output
Position data sampling time (Permissible speed)	None	0.176ms(900 r/min when ON/OFF range is 1 degree)
	Effective number of switches: 5 points SW Nos. 1 ～ 5	0.176ms(900 r/min when ON/OFF range is 1 degree)
	Effective number of switches: 10 points SW Nos. 1 ～ 10	0.352ms(450 r/min when ON/OFF range is 1 degree)
	Effective number of switches: 5 points (ON/OFF independent) SW Nos. 1 ～ 5	0.352ms(450 r/min when ON/OFF range is 1 degree)
Switch output setting method		Settings are specified by numeric inputs or by teaching.
Setting value memory		Non-volatile memories
Error detection		Memory error, Sensor error, No setting, Setting impossible
Advanced angle function	Pattern	Settings by points
	No. of points polygonal line	20 points per switch (switch No.1 ～ 10)
	Effective speed range	0 ～ 6000r/min
	Resolution	0.5°
	Speed setting unit	1 r/min
	Max. advanced angle	±180°
Top dead center stop angle function	Pattern	Settings by points
	No. of points polygonal line	30 points per program
	Effective speed range	0 ～ 6000 r/min
	Number of programs (Panel display)	16
	Speed setting unit	1 r/min
	Max. slippage correction range	7200°
	Angle setting unit	0.5°
Communication function		Serial (RS-232C) communication (setting value saving or loading, monitoring, operation commands) Connection by Mitsubishi-only protocol/MELSEC-A protocol Connection with angle display unit (NDP) is also possible Connection by OMRON-only protocol Connection with touch panel is possible (VARIMONI)
Auxiliary functions		External origin set function Timing pulse function Motion detection switch output function Hysteresis function Protected switch function Switch output enabling function External error cancel input Arbitrary pulse output function Current position value output (BCD, gray code (720-division)) / Speed output (binary code) Advanced angle function Top dead center stop function Password function Enhanced password function
Max. sensor cable length	Standard	100m
	Robotic(RBT)	100m

I/O spcification

Item		VS-5FXG-1	Description
Input signals	Program No.	4points	Inputs the exteral program No.
	Hold or external origin set	1point	Input to prevent current position from changing or for origin setting.
	Error cancel	1point	Input to cancel an error display.
	Switch output enable	1point	Switch signal will be output only upon the input of this signal.
	Slippage correction disabled	1point	Release the clutch for "Slippage correction" when using the top dead center stop function.
	Clutch ONN	1point	ON/OFF signal outputs occur in accordance with setting values.
Output signals	Switch outputs / Arbitrary pulse output	40points	ON/OFF signal will be output based on the switch setting value, or pulse signal will be output based on equally dividing a single rotation (division selectable from 1 ～ 360).
	Timing pulse / Motion detection switch	1point	60, 180 or 360 pulse signals will be output per rotation, or ON/OFF signal will be output based on the speed setting value.
	System ready	1point	Outputs when controller and sensor are functioning normally.
	Program No.	4points	The currently selected Program No. is output.
	Current position value (BCD, gray code (720-division)) Speed Binary output	11points	Current position (3-digit BCD + 0.5-deg display) signal will be output, or rotational speed will be output in binary code.
	Latch pulse	1point	Outputs a timing signal which ensures that the current position is read in a stable condition.
	Slippage correction	1point	During top dead center control, the brake timing signal output is triggered by the clutch ON signal input.

Item	Input specifications	Item	Output Specifications
Input signals	Program No. External origin set Current position HOLD Error cancel Switch output enable Slippage correction Clutch ON	Output signals	Switch output or arbitrary pulse Program No. Sysytem ready Slippage correction	Motion detection switch or timing pulse	Current position value (BCD, gray code (720-division)) or speed (binary)
Input circuit	DC input, photo-coupler isolation	Output circuit	Transistor (open-collector), photo-coupler isolation
Input logic	Negative logic	Output logic	Negative logic	Negative logic	Positive logic*1
Rated input voltage	24VDC	Rated load voltage	24VDC(30VDC max.)
Rated input current	10mA	Max. load current	100mA	100mA	10mA
ON voltage	10VDC or more	Max. voltage drop when ON	2.0V	1.5V	0.7V
OFF voltage	4 VDC or less

*1 : The output logic for current position and speed can be changed through parameter setting.